All about Revel Nail. All in one place.
SCROLL TO LEARN MOREWhat is Revel Nail?
Featuring hundreds of colors, Revel Nail has been a trailblazer in the Dip Powder industry for years and is the go-to resource for nail lovers of all kinds all over the world.
Staying on-trend, offering high quality products, and providing top notch customer service are Revel Nail’s top priorities.
We strive to create the highest quality products in the least harmful way at our warehouse in Blackwood, New Jersey, USA.
Easy apply & odor free
Vegan
Cruelty Free
12-Free
Made in the USA
Revel Nail Dip Powder is a safe & healthy alternative to acrylic and gel polish nail products.
DIP POWDER FEATURES
• Light Weight & Flexible
• Strong & Durable
• Non-Toxic & Odor-Free
• Maintenance-Free
• Crack & Chip Resistant
• Water Resistant
• Environmentally Friendly
• Calcium & Vitamin E Fortified
• Non-Porous & Non-Yellowing
• Comfortable
• Forever Shine
• No need for Primer
WHY REVEL NAIL?
• Revel Nail uses innovative technology and was developed by a group of nail professionals with decades of industry experience.
• Revel Nail Dip Powder applies in half the time of acrylic and is available in hundreds of gorgeous colors.
• Revel Nail Dip Powder is 5 free, 7 free, gluten free, cruelty free, and vegan!
HOW IS DIP HEALTHIER?
• Traditional acrylics and gel polish contain an ingredient called methacrylate which weakens nails beds. Revel Nail does not use any methacrylates in our formulation.
• Our liquids are more similar to the glue that is used in hospitals to seal a cut versus traditional nail products.
• Is dip powder bad for your nails? Since dip powder does not contain any methacrylates, you will notice how strong your natural nails have become, even after your first Dip Powder manicure.
WHY IS DIP SO POPULAR?
• Revel Nail Dip Powder is odor free & application is 7 easy steps.
• After removal your nail bed is left healthy and undamaged.
• Revel Nail Dip Powders outlast gel polish, are as durable as acrylics, but can be applied in half the time and removed easier than both.
• Revel Nail Dip Powder can last for up to 8 weeks, cutting down on how often you need to redo! (But with over 400 colors why would you want to wait?)
DO I NEED A UV/LED LIGHT?
• Nope! When it comes to general Dip Powder application you do not need a UV/LED light.
• However if UV/LED lights are your thing Revel has plenty of specialty shades and products that suggest the use of a UV/LED light.
Quick Tips: Use Gel Thinner after every manicure in both your Pro Base and Finish Gel.
Store upright and out of direct sunlight to help keep your liquids lasting as long as possible.
LIDS STUCK?
• Be careful not to get Pro Base or Finish Gel on the neck of the bottle or it will stick the cap to the bottle.
• If this happens, you can wrap a rubber band around the lid and try to open the bottle carefully. If the bottle does not open, we will replace it for you free of charge within 60 days of original purchase.
• In order to prevent this from happening in the future, make sure to get any excess off your brush with a lint-free paper towel.
Quick Fix: Use acetone or cuticle oil around the threading of your liquids to make them easier to open. Do NOT use Gel Thinner around the threading, this will seal your bottle shut.
THICK/STRINGY LIQUIDS?
• Too much powder has gotten into your bottle.
Quick Fix: Tap excess powder off between coats of Pro Base and/or use a small cosmetic brush to remove excess powder. To further prevent powder from getting into the Pro Base, wipe the brush on a lint-free paper towel after it touches the powder and before reinserting into the bottle.
• Air exposure.
Quick Fix: If the liquid has been exposed to air for a prolonged period of time it can thicken. Air can also be introduced if the bottle does not close properly. Wipe the neck of the bottle before closing to ensure a snug close and to prevent the cap sticking to the bottle.
THICK/STRINGY LIQUIDS?
• Activator got into the bottle of Pro Base.
Quick Fix: Be sure you are applying the activator AFTER you dip into the powder.
• Your Finish Gel got Activator inside of it.
Quick Fix: If the Finish Gel brush gets Activator on it and then goes back into the bottle, it will cause the liquids to get thick. This can also cause the Finish Gel brush to stiffen or harden.
• Brush Softener got into the bottle.
Quick Fix: Check out our YouTube video How to Use Brush Softener with instructions on how to use the Brush Softener properly.
MANI DULL OR STREAKY?
• Activator was not fully dry before you applied the Finish Gel, or you did not use enough Activator on the nail initially.
• If you are sure your Activator is completely dry, you may have gotten Activator in your Finish Gel which is preventing it from curing properly.
CLOUDY ACTIVATOR?
• Dip Powder got into the bottle.
• Make sure that you brush off excess powder with a cosmetic brush after you dip and wipe the brush off with a lint-free paper towel after application and before placing your Activator brush back in the bottle.
BUBBLES IN YOUR MANI?
• Too much Pro Base on the nail.
• Not enough Activator is on the nail so it cannot soak through completely.
Quick Fix: Dip your Activator brush back into the bottle after each individual nail to ensure you are using enough Activator.
• Activator is not completely dry before proceeding.
Quick Fix: Wait 15 seconds after the second coat of Activator, then wipe each nail with a lint-free paper towel.
• Air bubbles get trapped in the brush and end up in the liquid.
Quick Fix: Take your brush out of the bottle and wipe your brush in all directions on a piece of paper towel 2-3 times.
CAN I DO A REFILL?
• We don’t recommend doing refills because it can cause an uneven application. Revel Nail Dip Powder is just as easy to remove and reapply when you want to change the color.
• The only time we recommend a refill is if you are doing a French Manicure. If that is the case, please follow the steps below:
1. Lightly file until only a thin layer of the old dip powder is left. (Remove all dust particles with a cosmetic brush.)
2. Apply Pro Base on the entire nail, and dip into white powder first then into the pink powder.
3. Apply Activator, capping the front edge, ensuring to dip the Activator brush back in the bottle for each nail. Wait until dry.
4. File, buff, and shape the nails.
5. Apply Activator, capping the front edge, ensuring to dip the Activator brush back in the bottle for each nail. Wait until dry. Then wipe each nail with a lint-free paper towel.
6. Finish with two coats of Finish Gel.
Download and print our step-by-step instructions for our easy to use Dip Powder system.
Check out our video instructions & tutorials to learn how to dip your best mani yet!
Check out our YouTube Channel for more!
Revel YoutubeHOW TO APPLY DIP POWDER
Follow through to learn how to use Revel Dip Powder and create the perfect manicure.
HOW TO REMOVE DIP POWDER
Follow through to learn one of the ways to remove your Revel Dip Powder manicure.
HOW TO CREATE A FRENCH TIP
Follow through to learn how to make the clean and classic French Tip manicure.
HOW TO APPLY GLITTERS
Follow through to learn how to apply the biggest of glitters and still achieve a smooth mani!
HOW TO MARBLE
Follow through to learn how to make a marbled manicure with your favorite shades!
HOW TO OMBRÉ
Follow through to learn how to create a smooth and gradual ombré manicure!
Check out our video instructions on how to use our specialty shades!
Check out our YouTube Channel for more!
Revel YoutubeHOLO CHROME
Follow through to learn how to achieve a Holo Chrome mani that makes you feel like royalty!
MIRROR CHROME
Follow through to learn how to achieve a perfectly reflective manicure!
GEL THINNER
• Apply 2 to 5 drops of Gel Thinner to help thin out your liquids and start dipping your nails again.
• For the best results use Gel Thinner after every mani to keep your liquids from becoming thick.
• Gel Thinner can be used in both of our liquid lines, EZ Care and Professional for Pro Base and Finish Gel. Do not use it in any other liquids as this will result in ruining the liquids.
• Please note there is a 'point of no return' for thickening liquids. Use the Gel Thinner as soon as you notice a change in viscosity.
If your liquids have thickened beyond repair, please contact customer service and we will help you out!
BRUSH SOFTENER
• Remove the damaged brush from your bottle of Pro Base or Finish Gel and carefully wipe on a paper towel.
• Remove the brush from the Brush Softener. Carefully wipe the liquid off the wand and bristles of the Brush Softener brush on a lint-free paper towel.
• Let the brush from the Brush Softener bottle dry completely, it should not be blue anymore. Once dry, you can use the brush from the Brush Softener in the Pro Base or Finish Gel.
• Put the damaged brush into the Brush Softener and leave it in the bottle until another brush is damaged and follow the same steps.
• More of a visual learner? Check out our Youtube Channel and see how it's done!
CLEAN SLATE PEEL BASE
• Clean Slate Peel Base application methods will vary from person to person based on preferred manicure longevity as well as nail bed chemistry. We suggest trial and error to discover which application method works best for you!
• Naturally drier nail beds? We recommend a strip of Clean Slate down the middle, allowing it to dry completely before proceeding with the Dip Powder process.
• Naturally oilier nail beds? Try applying a small dot of Clean Slate in the center of the nail, allowing it to dry completely before proceeding with the Dip Powder process.
• More of a visual learner? Check out our Youtube Channel and see how it's done!
LACQUER BASE COAT
• For added longevity, pair our Base Coat with your Revel Mate’s manicure.
• Apply one thin coat of Base Coat to your nails. Allow the Base Coat to fully dry before moving on to applying your Revel Mate.
LACQUER TOP COAT
• To ensure that you have a chip-resistant, high-shine Revel Mate’s manicure, apply one thin coat of Top Coat to your manicure after your Revel Mate coats have fully dried.
View Lacquer Top CoatHOLO CHROME
• Dip into your favorite Holo Chrome shade or any other shade you want and dip your nails as usual.
• Stop before applying Finish gel.
• Apply a coat of our Tack Free Gel Top Coat,
making sure to cover your entire nail.
• Place your nails under a
UV/LED light for 15 seconds.
• Dip your nails into your Holo Chrome powder. Then using the chrome applicator carefully rub the dip powder into the nail.
• Place your nails back under your UV/LED light for 15 seconds to finish curing.
• Apply a second coat of the Tack Free Gel Top Coat. Place your nails under the UV/LED light for 30 seconds.
*Curing times may vary slightly by lamp wattage.
MIRROR CHROME
• Dip into your favorite Mirror Chrome shade, black, or any other shade you want and dip your nails as usual.
• Stop before applying Finish gel.
• Apply a coat of our Tack Free Gel Top Coat, making sure to cover your entire nail.
• Place your nails under a UV/LED light for 15 seconds.
• Dip your nails into your Mirror Chrome powder. Then using the chrome applicator carefully rub the dip powder into the nail.
• Place your nails back under your UV/LED light for 15 seconds to finish curing.
• Apply a second coat of the Tack Free Gel Top Coat. Place your nails under the UV/LED light for 30 seconds.
*Curing times may vary slightly by lamp wattage.
FANTASY CHROME
• Dip into your favorite Fantasy Chrome shade or any other shade you want and dip your nails as usual.
• Stop before applying Finish gel.
• Apply a coat of our Tack Free Gel Top Coat,
making sure to cover your entire nail.
• Place your nails under a
UV/LED light for 15 seconds.
• Dip your nails into your Fantasy Chrome powder. Then using the chrome applicator carefully rub the dip powder into the nail.
• Place your nails back under your UV/LED light for 15 seconds to finish curing.
• Apply a second coat of the Tack Free Gel Top Coat. Place your nails under the UV/LED light for 30 seconds.
*Curing times may vary slightly by lamp wattage.
GEL POLISH
• Be sure to shake your Gel Polish well before application to ensure that it is properly mixed.
• Apply a coat of your favorite shade of Gel Polish, making sure to cover your entire nail. Be sure to clean any excess off cuticles before curing.
• Place your nails under a UV/LED light for 30 seconds or until fully cured.
• Revel experts recommend doing 2 coats of Gel Polish to get the proper color turnout.
• Be sure to cure your Gel Polish fully in between each coat, placing your nails under the lamp for at least 30 seconds each or until fully cured.
*Curing times may vary slightly by lamp wattage.
TACK FREE GEL TOP COAT
• Use Tack Free Gel as a top coat on Gel, Dip Powder, and chrome manicures to get a brilliant shine!
• When using on Revel Nail Dip Powder, omit the second coat of Activator, then apply a thin coat of Tack-Free Gel Top Coat.
• Place your nails under a UV/LED light for 90 seconds or until fully cured.
• Please note that this product requires a 36-48 WATT UV/LED light to cure properly.
*Curing times may vary slightly by lamp wattage.
GLASS SHIELD GEL TOP COAT
• When using on Revel Nail Dip Powder, omit the second coat of Activator, applying a thin coat of the Glass Shield Gel Top Coat instead.
• Place your nails under a UV/LED light for 60 seconds or until fully cured.
• Apply a second thin layer of Glass Shield Gel Top Coat and cure for another 60 seconds.
• Wipe nail with a 90% alcohol wipe removing excess liquid to achieve the Glass Shield shiny look!
• Please note that this product requires a 36-48 WATT UV/LED light to cure properly.
*Curing times may vary slightly by lamp wattage.
MATTE GEL TOP COAT
• When using on Revel Nail Dip Powder, omit the second coat of Activator.
• Gently rough up the nail with a file or buffer block before application to ensure the Matte Gel Top Coal adequately adheres to the nail.
• Apply a thin coat of the Matte Gel Top Coat.
• Place your nails under a UV/LED light for 60 seconds or until fully cured.
• To finish off your manicure it is CRUCIAL that you wipe the nail with lint free paper towel soaked in alcohol.
*Curing times may vary slightly by lamp wattage.
GEL BASE COAT
• Use our Gel Base Coat before applying Gel Polish to extend the life of your gel mani!
• Apply a thin coat of the Gel Base Coat, making sure to cover your entire nail. Be sure to clean any excess off cuticles before curing.
• Place your nails under a UV/LED light for 30 seconds or until fully cured.
• With some dip powders shades the Gel Base Coat can be used to apply dip powder using the "Gel Method."
*Curing times may vary slightly by lamp wattage.
GEL METHOD
• Apply thin layer of Gel Base Coat and dip into powder.
• Place your nails under a UV/LED light for 60 seconds.
• Repeat until you achieve desired color or thickness.
• Buff and file if needed before applying another coat of the Gel Base Coat.
• Place your nails under a UV/LED light for 60 seconds.
• Apply Tack-Free Gel Top Coat and place your nails under a UV/LED light for 120 seconds or until fully cured.
*Please note using gel liquids may also effect the color pay off of your dip powders. Curing times may vary slightly by lamp wattage.
Check out our video instructions on how to use our Extension Soft Gel Tips!
Revel YoutubeSTEP ONE: PREP NAIL
- Prepare by sanitizing hands and pushing back cuticles.
- Using a fine drill bit or buffer/file, remove shine from nails.
- It is recommended to file down any excess length of your natural nail.
STEP TWO: SIZE TIPS
- Tips should fit your natural nail from sidewall to sidewall naturally without applying pressure.
- If you are in between sizes, size up and file sides if necessary.
STEP THREE: PRIME NAIL
- Remove any dust from nails and skin by wiping the nail clean with alcohol.
- Apply “Prep | Nail Dehydrator” to nail in one thin coat.
- After nail is fully dry apply “Prime | Acid-Free Primer” to entire nail in one thin coat.
STEP FOUR: BASE GEL
- Apply a thin layer of “Bond” to all natural nails and cure in a LED lamp for 60 seconds or 2 minutes for UV.
- Apply a thin coat of “Prime” to the inside of the nail tips using the brush to scrub the product into the tip.
STEP FIVE: APPLY TIP
- Apply “Bond” to the inside of the gel tip where it contacts that natural nail.
- Press the tip to the nail at an angle starting at the base of the nail and slowly push downward, allowing the gel to spread to the free edge.
STEP SIX: FLASH CURE
- While holding down the tip in place, flash cure with Spectra Flash Cure UV/LED Lamp forn15-20 seconds.
- Carefully repeat steps 5 and 6 to apply gel tips on the rest of your nails.
STEP SEVEN: CURE & SHAPE
- Fully cure all nails in a LED lamp for 60 seconds or 2 minutes for UV.
- Once nails are cured and secured, file and shape the tips to your liking.
STEP EIGHT: FINISH MANI
- Proceed with your favorite shade of Lacquer, Gel Polish, or Dip Powder to finish out your manicure.
- Seal and protect your manicure with Tack Free Gel Top Coat and cure for 90 seconds in a UV/LED lamp.