How to do Cat Eye Gel Polish Nails

• Step 1: PREP Start with sanitized hands, trimmed cuticles, and gently buffed nails. 
• Step 2: SHAPE File your natural nail into the desired shape. 
• Step 3: CLEANSE Use alcohol and a lint-free wipe. 
• Step 4: BASE Apply a thin coat of Revel Nail Gel Base. Cure for 1 minute in UV/LED Lamp. 
• Step 5: POLISH Using a creme gel polish color of your choice (we recommend the matching creme to your magnetic gel polish), apply a thin coat. Cure for 1 minute. (Pro Tip: Some colors may need a third coat for full coverage). 
• Step 6: MAGNETIZE Apply a coat of magnetic gel polish to the whole nail. Do NOT cure. 
• Step 7: DRAMATIZE Using the magnet, slowly approach your nail from both sides plus the tip and your cuticle. See the magnetic glitters gravitate toward the center.  
• Step 8: FLASH CURE Happy with your design? Then flash cure for 15 seconds and move onto the next nail. Repeat for all nails. 
• Step 9: CURE Once all nails have the look you want, cure them for 1 minute (Pro Tip: For a bolder velvet effect, add more coats of magnetic gel polish and repeat steps 7-9.) 
• Step 10: TOP COAT Apply a thin layer of Revel Nail Tack Free Gel. Cure for 1 minute. 
• Step 11: MOISTURIZE Apply Revel Nail Cuticle oil to the skin surrounding the nail for a complete, nourished, and calcium enriched gel polish manicure! 

• Step 1: PREP NAILS Sanitize hands and push back cuticles. Using a fine drill bit, file or buffer, remove shine from nails.
• Step 2: PRO BASE Apply a thin layer of Liquid #1 Pro Base using even strokes from base to tip.
• Step 3: DIP NAIL Dip finger in powder using a scooping motion and tap or brush off excess dip powder. Repeat until each nail should have two coats of powder.
• Step 4: ACTIVATE Apply a generous amount of #2 Activator on all ten fingers covering the edges and capping the tips of the nails. Let dry for two min.
• Step 5: BUFF & SHAPE Shape nails with a file or drill to remove excess powder from cuticle area. Smooth out nails with buffer, then rinse hands with water (no soap).
• Step 6: MAGNETIZE Apply a coat of magnetic gel polish to the whole nail. Do NOT cure. 
• Step 7: DRAMATIZE Using the magnet, slowly approach your nail from both sides plus the tip and your cuticle. See the magnetic glitters gravitate toward the center.  
• Step 8: FLASH CURE Happy with your design? Then flash cure for 15 seconds and move onto the next nail. Repeat for all nails. 
• Step 9: CURE Once all nails have the look you want, cure them for 1 minute (Pro Tip: For a bolder velvet effect, add more coats of magnetic gel polish and repeat steps 7-9.) 
• Step 10: TOP COAT Apply a thin layer of Revel Nail Tack Free Gel. Cure for 1 minute. 
• Step 11: MOISTURIZE Apply Revel Nail Cuticle oil to the skin surrounding the nail for a complete, nourished, and calcium enriched gel polish manicure! 

How to use Gel Polish:

Looking for a manicure that lasts longer than Nail Polish but you’re not yet ready to switch to dip powder? Or want a long-lasting high-shine finish pedicure that matches your favorite dip power? Our gel polish is perfect for you! Coming in a variety of colors matching some of our most popular dip powder and nail lacquer shades.

Instruction for a Gel Polish Manicure:

• Prep – THESE ARE THE BASIC PREP STEPS
• PREP – Sanitize hands and push back cuticles
• REMOVE SHINE – Using a fine drill bit or 150 grit file, remove shine from nails.
• SHAPE - Shape nails with a 180 grit file.
• ALCOHOL WIPE – Using a lint free wipe, clean the nail with alcohol
• GEL BASE - Apply a thin layer of Revel Nail Gel Base from cuticle to free edge, capping the tip. Using a LED light cure 30 Seconds or use an UV light to cure for 1 minute.
• GEL POLISH - Using gel polish color of choice apply a thin layer from cuticle to free edge. Be sure to cap the tips of the nail to ensure complete coverage. Cure 90 seconds with our UV/LED Lamp, grab your lamp here.
• REPEAT – Perform steps 3-4 again to each nail. Each nail should have 2 layers of gel polish. Pro Tip* – some colors may need a third layer to give a complete full coverage.
• GEL TOPCOAT- Apply a thin layer of Revel Nail Tack Free Gel from cuticle to free edge. Remember to cap the tips. Cure for 60 seconds with a LED light or 2 minutes with an UV Light
• MOISTURIZE - Apply Revel Nail Cuticle oil to the skin surrounding the nail to have a complete, nourished, and calcium enriched gel polish manicure.